M3 replica bumper install on E90

Im currently looking to put an M3 replica bumper on my E90 but there are two important things I have to cover first before I buy the bumper

1:headlight washer nozzles
2:headlight washer covers
3:front pdc

on point 1,can anyone shed some light whether I will need a new headlight washer nozzle as it seems majority of the 3 series use a telescopic spray nozzle and the M3 uses a plain spray nozzle.You can see in the two photos how the headlight washers differ in an M3 bumper and my standard bumper






on realoem it specifies different part numbers so I am led to believe they are different mechanisms.

on point 2,its a given I need new headlight washer covers but it will be tricky to try judge and make cut outs on bumper as there are no predrill holes on the inside of the replica bumper apparently.

finally on point 3,i will be retrofitting front pdc to the front bumper too while im working on the front bumper so I will need to drill holes in bumper for the sensors.this should not be a problem on front bumper

Does anyone on the forum own a E90 M3 that is willing to take a video of the headlight washer nozzles in action so I can compare their operation to that of my 320d headlight washer nozzles.

thanks in advance